Programmable USB cable

Programmable USB cable VOTOL V2 – for controllers EM150/2, EM200/2, EM260/2

Fast and reliable configuration of VOTOL EM/2 CAN V2 series controllers.

Programmable USB cable VOTOL V2designed to connect and configure series controllersEM150/2, EM200/2, EM260/2using a PC. This is the original cable recommended by the manufacturer for the correct operation of the software and fine-tuning the controller parameters through the CAN V2 interface.

Using the right cable is an important condition for safe firmware and correct configuration of controllers, as it avoids errors in data transmission and provides a stable communication between the computer and the controller.

Purpose and capabilities of the VOTOL V2 USB cable:

Connecting a VOTOL EM/2 CAN V2 series controller to a PC for programming and configuration
Compatibility with controllersEM150/2, EM200/2, EM260/2
Recommended data transfer speed:115,200 bps(Selected in software when connected)
Reliable communication via standard USB interface
Ease of use: does not require additional adapters or adapters

¶Important information before buying:

Before placing an order, make sure your controller version matches the supported models:EM150/2, EM200/2, EM260/2 (V2). If you are not sure about the version of your equipment, please contact the seller for advice.

Using an inappropriate cable or incorrectly adjusting the exchange rate can lead to the impossibility of correctly connecting the controller to the PC.

Technical specifications of the VOTOL V2 USB cable:

Why choose the original VOTOL cable?

• Compatibility with VOTOL EM150/2, EM200/2, EM260/2

• Stable operation of software without communication failures

• There is no risk of damage to the controller during programming.

• Simple connection – no soldering, adapters or additional modules required

• Reliability and durability of original materials

Instructions for use:

1. Connect the USB cable to the VOTOL controller and to the PC.

2. Run the official software to configure the controller.

3. Set the data transfer speed to115,200 bps.

4. Perform the necessary settings or update the controller firmware.

5. Once completed, turn off the cable.

Frequently asked questions about the VOTOL V2 USB cable:

Will the cable be suitable for other VOTOL controller models?
¶ The cable is only suitable for series controllers.EM150/2, EM200/2, EM260/2 (V2). If you have a different model, consult the seller.

Can this cable be used to update the firmware?
Yes, the cable is designed both for programming parameters and for updating the firmware of controllers.

Do I need a special driver to run the cable?
Standard Windows operating systems usually automatically install the driver for the USB interface. It is recommended to use the current version of the software provided by the manufacturer VOTOL.

Why do you buy from Deller?

Official supplies and original components
Consultation and assistance in the selection of equipment
Fast delivery throughout Russia
Quality and reliability assurance