QS165 12kW 60H V3

Electric motor QS165 12kW 60H V3 Mid Drive

The QS165 12kW 60H V3 is a powerful synchronous electric motor with permanent magnets (PMSM) and an internal rotor, made in a mid-drive design with a single-axle layout. Equipped with a built-in gearbox with a gear ratio of 1: 2.37, which provides outstanding torque on the output shaft - up to 170 Nm. The engine has a high efficiency of up to 94%, IP67 protection and can be equipped with both Hall sensors and encoder. The ideal solution for high-performance electric motorcycles, buggies, ATVs and custom electric transport projects.

Main parameters:

• Engine type: PMSM with internal rotor
• Brand: QSMOTOR
• Engine design: Single axle, medium drive (Mid Drive)
• Magnet height: 60 mm
• Number of pairs of poles: 5 pairs
• Transmission ratio of the integrated gearbox: 1:2.37
• Color: black

Power and voltage:

• Nominal power: 12,000 watts (12 kW)
• Maximum power: 20,000 watts (20 kW)
• Nominal voltage: 72.

Speed and traction characteristics (at the output of the gearbox):

• Nominal speed: 2280 rpm
• Maximum speed: 3165 rpm
• Maximum torque: 170 Nm.

Cooling, sensors and protection:

• Cooling method: airborne
• Thermometer: KTY83/122
• Sensors: Hall sensor/encoder
• Hall sensor configuration: single Hall kit or encoder kit, with waterproof connectors
• Water resistance class: IP67

Temperature conditions:

• Operating temperature: 70-120°C
• Peak temperature: 150°C

Electrical connections:

• Phasing wire: length 750 mm, cross section 35 mm2 (excluding insulation)

Physical parameters:

• Net/gross weight: approximately 15 kg
• Package sizes: 33 x 33 x 44 cm

Advantages of the QS165 12kW 60H V3 Mid Drive:

• Outstanding efficiency up to 94% – minimum energy loss and maximum range
• Peak power up to 20 kW - excellent acceleration dynamics and high maximum speed
• Torque up to 170 N·m at the output of the gearbox - confident traction in any modes
• Built-in gearbox 1:2.37 - efficient conversion of revolutions into traction without external solutions
• Mid Drive design – optimal weight distribution and low center of gravity
• IP67 protection – complete dust and water resistance for extreme conditions
• Ability to complete the encoder - accurate control and smooth operation
• Built-in thermal sensor KTY83/122 - reliable protection against overheating
• Waterproof sensor connectors - stable operation in all weather conditions
• Magnets 60 mm high – high magnetic flux density and stable power

Where applicable:

• High-performance electric motorcycles and super-motorcycles
• Electric buggies and electric sports cars
• Electric ATVs
• Custom projects of premium electric transport
• Conversion of gasoline equipment into electric transport

DellerEV Electronics and power solutions for your movement. Electric motors and controllers for electric motorcycles, ATVs, buggies and electric vehicles with high efficiency, recovery and programmable settings.